The public utility company of Bochum in cooperation with the International Geothermal Centre is planning to utilize mine waters from the former Dannenbaum colliery (in operation between 1859 and 1958) for heating and cooling purposes as one of the ways to benefit from the geothermal energy resources. The Dannenbaum colliery is located below the former Opel factory site in the Bochum-Laer area in North-West Germany. Geothermal heat will be extracted from mine depths of around 800 m, where temperatures of approximately 30°C are expected. Cooling will be possible from a mine section located at depth of around 300 m with anticipated temperatures of around 18°C. The energy potential of the mine water is predicted to cover around 75% of the heating and cooling requirements of the Mark 51°7 site, where various technology-driven companies and institutions, including DHL or Ruhr University, will have their infrastructure. The remaining heat requirement will be covered by the district heating network of FUW GmbH, a subsidiary of the public utility company of Bochum. The remaining cooling volumes are provided via conventional refrigeration systems.

 

Opel Car Factory and Headquarters, over Dannenbaum Mine site from 1962 to 2014

Work on the development area of MARK 51 ° 7 in 2016 at old Opel and old Dannenbuam site

For more information on this project and others, follow the #GeothermalFactsandStats campaign on all our social platforms and check back for weekly blog posts!

Sources: www.waz.de and www.bochum.de and www.bochum2022.de

Author: Michal Kruszewski

#geothermal #minewaters #heating #cooling #energyresources #Germany #internationalgeothermalcentre #heatpower

January 9, 2019

Geothermal heating and cooling from Dannenbaum’s mine waters

The public utility company of Bochum in cooperation with the International Geothermal Centre is planning to utilize mine waters from the former Dannenbaum colliery (in operation […]
January 7, 2019

Co-Production of Energy and Metals

CHPM2030 develops an “orebody-EGS (Enhanced Geothermal System)” that will serve as a basis for the development of a new type of facility used for the co-production […]
January 1, 2019

Leveraging Existing O&G Wells will Reduce Drilling Costs by 50%

Bits of diamonds lying around, illuminating the outline of a wellbore in the ground… Up until now, drilling has been the only means used to extract […]
December 26, 2018

Fluid Hammer Could Reduce Costs of Geothermal Wells

Fluid-Powered Downhole Hammer Has Potential to Significantly Reduce the Cost of Deep Geothermal Borehole Geothermal waters usually occur at relatively greater depths and in harder rock […]